Battery Dyness PowerBrick Plus (LiFePo4 51.2V 314Ah 16.08 kWh)

Dyness PowerBrick Plus 16.08 kWh Battery

Powerful energy storage for homes, businesses, and solar power systems

Dyness PowerBrick Plus is a modern high-capacity low-voltage battery designed for backup power systems and solar energy storage. A single module combines a nominal voltage of 51.2 V, a capacity of 314 Ah, and approximately 16.08 kWh of energy storage, making it possible to build a powerful energy system without using a large number of smaller battery modules.

PowerBrick Plus is a practical choice for private homes, offices, stores, small businesses, and other facilities where a significant amount of energy needs to be stored and equipment must remain operational during grid outages.

Dyness — an expert in energy storage technologies

Modern ESS solutions for residential and commercial energy systems

Dyness specializes in the development of energy storage systems and produces battery solutions for a wide range of applications — from residential solar power systems to large-scale energy storage installations.

PowerBrick Plus continues the concept of compact low-voltage Dyness energy storage solutions while offering significantly higher capacity in a single module. This makes it possible to create a substantial energy reserve while keeping the system compact, straightforward, and convenient for future expansion.

16.08 kWh of energy in a single battery

High capacity without a complex multi-battery configuration

One of the main advantages of Dyness PowerBrick Plus is its substantial energy capacity. A single battery can store approximately 16.08 kWh of electrical energy. This is more than three times the capacity of commonly used 5 kWh-class battery modules.

This energy reserve allows lighting, refrigerators, boilers, pumps, computer equipment, communication systems, security equipment, and other loads to operate for longer periods. The actual backup time depends on the connected load and system settings.

LiFePO4 314 Ah — technology designed for daily operation

Stability, durability, and safety for your battery system

Dyness PowerBrick Plus is based on 314 Ah lithium iron phosphate (LiFePO4) cells. This battery chemistry has proven itself in stationary energy storage applications thanks to its high thermal stability, long service life, and ability to withstand regular charge and discharge cycles.

This is particularly important for solar power systems, where the battery can charge from photovoltaic panels during the day, supply electricity to the building in the evening and at night, and provide backup power when the utility grid becomes unavailable.

51.2 V / 314 Ah — a high-capacity low-voltage energy storage system

An excellent solution for powerful hybrid inverters

The battery has a nominal voltage of 51.2 V and a capacity of 314 Ah. PowerBrick Plus belongs to the low-voltage battery system category and can be used with compatible 48 V hybrid and off-grid inverters.

Support for CAN and RS485 communication interfaces enables data exchange between the battery BMS and a compatible inverter. This allows the system to monitor battery parameters and properly manage charging and discharging processes.

Up to 200 A charging and discharging current

High power capability for demanding loads

Dyness PowerBrick Plus supports a maximum charging current of up to 200 A and a maximum discharging current of up to 200 A. At a nominal voltage of 51.2 V, this corresponds to up to 10.24 kW of power, allowing a single battery module to support relatively high-power loads.

This capability is particularly useful in systems where several energy-intensive appliances operate simultaneously or where available solar generation needs to be stored quickly and efficiently.

Key advantages of Dyness PowerBrick Plus

• 16.08 kWh in a single module — a substantial energy reserve without combining multiple smaller batteries.
• LiFePO4 314 Ah — modern LFP cells designed for intensive cyclic operation.
• 51.2 V nominal voltage — low-voltage architecture for compatible hybrid and off-grid inverters.
• Up to 200 A charging and discharging — capable of supporting high-power loads.
• Up to 95% depth of discharge — efficient utilization of the available stored energy.
• ≥8000 cycles — designed for long-term operation in energy storage systems.
• CAN / RS485 — communication between the BMS and compatible inverters.
• IP65 protection rating — enhanced protection of the enclosure against dust and water.
• Wi-Fi and APP — intelligent system monitoring capabilities.
• Scalable up to 50 modules — significantly expand the total energy storage capacity.

IP65 — greater flexibility when choosing the installation location

Protected enclosure for different operating environments

The Dyness PowerBrick Plus enclosure has an IP65 protection rating. This provides greater flexibility when selecting the battery installation location and protects the equipment against dust ingress and water jets.

The manufacturer provides options for both floor-mounted and wall-mounted installation. This design makes it possible to adapt the battery placement to the specific technical room and system configuration.

Scale the system up to 50 batteries

From residential backup power to large-scale energy storage

If one PowerBrick Plus is not enough, the system can be expanded by connecting additional batteries in parallel. The manufacturer supports configurations of up to 50 modules, allowing the total nominal system capacity to exceed 800 kWh.

This makes it possible to start with a single 16.08 kWh battery and increase the energy reserve in the future as electricity consumption, solar system capacity, or backup runtime requirements grow.

Backup power during grid outages

Electricity remains available when you need it most

When paired with a properly selected hybrid inverter, Dyness PowerBrick Plus can become the foundation of a powerful backup power system. While grid power or solar generation is available, the battery stores energy that can later be used when the external power supply is interrupted.

The large 16.08 kWh capacity makes it possible to back up not only essential loads but also create a comprehensive backup power solution for a home or commercial facility — provided that the inverter power and connected loads are properly calculated.

More of your own solar energy — less electricity from the grid

Store surplus solar generation and use it when you need it

In a hybrid solar power system, PowerBrick Plus makes it possible to store surplus energy generated by photovoltaic panels instead of sending unused electricity to the external grid. The stored energy can then be used in the evening, at night, during periods of high electricity demand, or in the event of a grid outage.

This operating principle increases the self-consumption of solar energy and helps maximize the benefits of the installed photovoltaic system.

Professional Dyness selection and installation by Lirik Solar

Battery, inverter, and solar panels working as one integrated energy system

Lirik Solar will help you not only purchase Dyness PowerBrick Plus but also properly integrate the battery into your property's power system. When selecting equipment, it is important to consider inverter power, maximum battery currents, solar array specifications, actual electricity consumption, and the required backup runtime.

We provide design, equipment selection, installation, and configuration of solar power plants and backup power systems for residential and commercial properties. Lirik Solar selects compatible inverters, battery storage systems, solar panels, protection equipment, and other components required for reliable and efficient system operation.

Dyness PowerBrick Plus — a large energy reserve in a single enclosure

16.08 kWh for applications where a standard battery is no longer enough

Dyness PowerBrick Plus 51.2 V 314 Ah 16.08 kWh battery is a powerful solution for solar power systems, off-grid installations, and backup power applications. High capacity in a single module, LiFePO4 technology, high charging and discharging currents, integrated BMS, CAN/RS485 communication, and system scalability make it possible to build energy storage solutions for a wide range of electricity consumption requirements.

If you need to provide your home or business with a substantial energy reserve while retaining the option to expand the system in the future, Dyness PowerBrick Plus 16.08 kWh is one of the most attractive formats among Dyness low-voltage battery storage solutions.

Buy Dyness PowerBrick Plus from Lirik Solar

We will select an energy system based on your actual requirements

Order the Dyness PowerBrick Plus 16.08 kWh from Lirik Solar. We will help determine the required number of batteries, select a compatible inverter, and calculate the optimal solar power system configuration based on your property's power requirements and electricity consumption.

Lirik Solar provides a comprehensive approach to energy independence: battery storage systems, hybrid inverters, solar panels, installation, configuration, and system commissioning.

Dyness PowerBrick Plus Documents:

Dyness PowerBrick Plus Datasheet

Dyness PowerBrick Plus Manual